የመንጠቆ አይነት ተኩስ ፍንዳታ ማሽንበአጠቃላይ ትልቅ ገጽታ አለው ፣ እና የመጫን ሂደቱ ከአነስተኛ መሣሪያዎች ይልቅ በአንፃራዊነት በጣም የተወሳሰበ ነው። የኋላ መሳሪያዎችን መደበኛ አሠራር ለማረጋገጥ ትክክለኛው የመጫኛ እና የሙከራ ማሽን ቁልፍ ናቸው። ልምድ በሌላቸው የመጀመሪያ ኦፕሬሽኖች ውስጥ ተጠቃሚዎች የሚመለከታቸው ሠራተኞችን መመሪያ በጥብቅ እንዲከተሉ ወይም መመሪያዎቹን እንዲያመለክቱ ይጠበቅባቸዋል። ያልተፈቀደ ክዋኔ በቀላሉ የማይመለስ ጉዳት በመንጠቆ ተኩስ ፍንዳታ ማሽን. የshot blasting machine manufacturer has sorted out the precautions for installation and test machine to share with you. I hope it will be helpful to users who use the device for the first time.
1. Installation. የመንጠቆ አይነት ተኩስ ፍንዳታ ማሽን is installed and debugged in the production plant and disassembled into several parts before being transported to the user site for installation. Although there is no pit, the foundation must be firm, the anchor bolt holes must be standardized, and the chamber body must be adjusted. After the second irrigation, the anchor bolt nuts can be tightened after solidification. After the chamber body is fixed, the various parts can be installed. የprecautions for the installation and debugging of the relevant components are introduced below.
1. የተኩስ ፍንዳታ መሣሪያ
የshot blasting device has been installed on the chamber body before leaving the factory. Please pay attention to the problems to be debugged before use. Check whether the fixed positions of the blade, the pill wheel, the directional sleeve, and the guard plate are accurate and firm, and check whether the direction of rotation is correct after power on. Then adjust the position of the directional sleeve opening. Theoretically, the angle between the front edge of the directional opening and the front edge of the blade throwing position is about 900. After fixing the position of the directional sleeve, the position of the projectile belt can be detected by hanging Place a steel plate or wooden board on the position of the workpiece facing the exit of the shot blasting machine, start the shot blasting machine, put a small amount (2-5kg) of projectiles into the blasting tube, and then stop, check whether the hit position on the steel plate is suitable for the needs, such as Close the window of the bias-adjustable directional sleeve downwards, and vice versa, until it fits, and note the position of the directional sleeve opening as a basis for future replacement of the directional sleeve.
2. ማንሻ እና ስፒን ማጓጓዣ
የመጫኛ ባልዲ እና ጠመዝማዛ ቢላዎች በትክክለኛው አቅጣጫ እየሄዱ መሆናቸውን ለመፈተሽ መጀመሪያ የጭነት ሙከራን ያካሂዱ ፣ ከዚያ መዘበራረቅን ለማስቀረት የመከለያውን ቀበቶ ወደ መጠነኛ ውጥረት ያጥብቁ እና ከዚያ ለመፈተሽ የጭነት ሙከራ ያካሂዱ። የቀዶ ጥገና እና የማስተላለፍ አቅም ፣ ምንም ዓይነት እንግዳ ጫጫታ እና ንዝረት ካለ ፣ መሰናክሎችን ይፈትሹ እና ያስወግዱ።
3. እንክብል-አሸዋ መለያየት
መጀመሪያ የአውራ በግ እንቅስቃሴ ተጣጣፊ መሆኑን ይፈትሹ ፣ ከዚያ የመለያያ ሳህኑን ትክክለኛ ቦታ ይፈትሹ ፣ ከዚያ ሰቀላው ሲጫን እና ሲታረም ፣ ቀጣይነት ያለው የብረት ጥይቶች ፍሰት አለ ፣ እና የብረት ጥይቶቹ እየወጡ እና እየወደቁ መሆኑን ያረጋግጡ። ቱቦው ሲወጣ